Viking MR 4082, Instruction Manual

Page: 102 / 420

0478 193 9902 A - EN
100
Insert feather key (5) in the rear wheel
axle. Push the wheel (4) with the large
washer (3) onto the wheel axle.
Allow retaining ring (2) to engage into the
groove on the wheel axle.
Fit cap (1) onto the wheel axle.
14.11 Opening and closing the storage
compartment
Opening the storage compartment:
● Stop the engine and allow it to cool
down. (
Ö 12.3)
● Remove the ignition key and store
safely.
● Engage the parking brake. ( Ö 8.10)
● Pull the driver's seat adjustment lever
upward and move the driver's seat to
the frontmost position (towards steering
wheel), or fold it forward.
Remove screws (1) by turning through 90°
anti-clockwise.
Fold storage compartment (2) up and
forward (toward driver's seat).
Closing the storage compartment:
Fold the storage compartment closed:
Press the screws (2) downward slightly
and hold.
Tighten the screws (2) clockwise (approx.
90°).
14.12 Engine cover
The engine cover can be folded up in order
to perform maintenance and cleaning work
on the engine. Sufficient space is available
for these operations when the cover is
folded up.
Before folding up
● Park the machine on level and solid
ground.
● Stop the engine. ( Ö 12.3)
● Remove the ignition key and keep it in a
safe place.
● Engage the parking brake. ( Ö 8.10)
● Remove the grass catcher box.
(
Ö
12.10)
● Remove the discharge chute. ( Ö 14.5)