Viking ME 235, Instruction Manual

Page: 21 / 180

EN
ES
19
PT
NO
SV
FI
DA
EL
BG
UK
0478 121 9803 A - EN
● Thoroughly lubricate/grease all moving
parts.
1 2. 1 Transport
Carrying the machine:
● Carry the lawn mower with one hand at
the transport handle (1) and the other
hand at the housing (2). Always ensure
sufficient distance between the mowing
blade and your body, particularly your
feet and legs.
or
● Carry the lawn mower with one hand at
the transport handle (1).
Securing the machine (lashing):
● Secure the lawn mower and grass
catcher box on the load floor using
suitable fastening materials.
● Fasten ropes or straps at the transport
handle (1) and at the lower
handlebars (3).
Important information on maintenance
and care of the product group
lawn mower, manually-operated and
mains-powered (ME)
VIKING assumes no liability for material or
personal damage caused by the non-
observance of information contained in the
operating instructions, in particular with
regard to safety, operation and
maintenance, or which arise through the
use of unauthorised attachment or spare
parts.
Please always observe the following
important information for the prevention of
damage or excessive wear to your VIKING
machine:
1 . Wearing parts
Some parts of the VIKING machine are
subject to normal wear even when used
properly and must be replaced in due time
depending on type and duration of use.
These include:
– blades
2. Compliance with the information in
this instruction manual
The VIKING machine must be used,
maintained and stored with the care
described in this instruction manual. Any
damage caused by non-compliance with
the safety, operating and maintenance
instructions is the sole responsibility of the
user.
This applies in particular to:
– inadequately dimensioned power
cables (cross section),
– incorrect electrical connection
(voltage),
– product modifications not approved by
VIKING,
– the use of tools or accessories which
are not approved or suitable for the
machine, or are of inferior quality,
– improper use of the product,
– use of the product for sporting or
competitive events,
– resultant damage due to continued use
of the product with defective
components.
3. Maintenance operations
All operations listed in the section
"Maintenance" must be performed
regularly.
If these maintenance operations cannot be
carried out by the user, a specialist dealer
must be commissioned to perform them.
VIKING recommends that you have
maintenance operations and repairs
performed exclusively by a VIKING
specialist dealer.
VIKING specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– damage to the motor as a result of
inadequate cleaning of the cooling air
guide (inlet slots),
– corrosion and other resultant damage
caused by incorrect storage,
– damage to the machine through the use
of inferior-quality spare parts,
1 2. Transport
Risk of injury!
Observe the section "For your
safety" before transporting. (
Ö 4.)
When transporting, always wear
suitable safety clothing (safety
shoes, thick gloves).
Always disconnect the power cable
before lifting or transporting.
1 7
1 3. Minimising wear and
preventing damage
Та
ше
в
-
Га
лв
ин
г
ОО
Д
www.tashev-galving.com