The
E-40
Series entry phones are compact, weather and vandal resistant, telephone line powered speaker phones designed to
provide two-way handsfree communication. The
E-40
's compact size allows it to be mounted in a standard single gang electri-
cal box. The
E-40
is available in five different attractive finishes to match your door hardware, light fixtures, etc. Replacement
E-40
faceplates (
PNL40
) can be purchased separately and are available in all five standard finishes. The
E-40
’s blue LED con-
tinually provides light for locating the push button in dark locations, dims to indicate off hook and flashes during incoming ring.
Note:
LED not available on all models. Contact Viking for more information.
The
E-40
entry phones can share a single phone
line with house or small business telephones when used with a
Viking
model
C-200
,
C-250
or
C-2000B
Entry Phone controller.
The
E-40
entry phones can also be connected to an unused analog station port (programmed for ring down) on a phone system
or connected directly to a telephone line when used with a
Viking
model
K-1900-5
or
K-1900-30
auto dialer. The
E-40
features
microphone and speaker volume controls, selectable auto answer for monitoring and intelligent call progress detection for auto-
matic hang-up when the call is completed. For outdoor installations where the unit is exposed to precipitation or condensation,
the
E-40
Series is available with Enhanced Weather Protection (
EWP
). For more information on
EWP
, see
DOD# 859
.
Compact Entry Phones Available in Five Attractive Finishes
• Compact size:
Front panel is the size of a typical single gang mid-
size wall plate
• Mounting:
Flush mounts in a single gang electrical box (2.25”
deep x 2.00” wide x 2.84” tall minimum) or surface mounts in a Viking
model
VE-3x5
(not included, see
DOD# 424
)
• Available in 5 standard faceplate finishes:
Brushed Stainless Steel,
Oil Rubbed Bronze, Polished Brass, Satin Black and Satin White
• PNL-40 faceplates:
Replacement faceplates with matching screws
available in all five standard finishes
• Vandal Resistant Features:
16 gauge polished brass or 18 gauge
304 stainless steel faceplate, 316 stainless steel push button, carbon
fiber reinforced plastic speaker screen, scratch resistant powder
coating, hex drive mounting screws
• Weather Resistant Features:
Mylar speaker, faceplate gasket,
mic and speaker gasket, internally sealed (IP67) push button
switch, self draining mic mount and UV stable weather resistant
powder coating (excluding
E-40-SS
304 Stainless Steel faceplate)
•
E-40-EWP
is designed to meet IP66 Ingress Protection Rating
(see
DOD# 859
for more information)
• Telephone line powered
• Microphone and speaker volume controls
• Programmable Intelligent call progress detection for automatic
hang-up on CPC, silence, busy signal, or time out
• Selectable auto answer feature for monitoring
• Programmable VOX (mic/speaker) switching speed
• Blue LED helps locate push button, indicate ringing and off hook
P
P
r
r
a
a
c
c
t
t
i
i
c
c
e
e
T
T
E
E
L
L
E
E
C
C
O
O
M
M
S
S
O
O
L
L
U
U
T
T
I
I
O
O
N
N
S
S
F
F
O
O
R
R
T
T
H
H
E
E
2
2
1
1
S
S
T
T
C
C
E
E
N
N
T
T
U
U
R
R
Y
Y
TECHNICAL
TECHNICAL
F
F
e
e
a
a
t
t
u
u
r
r
e
e
s
s
E-40 Series
E-40 Series
Compact Single Gang
Entry Phones with LED
November 4, 2011
Power:
Telephone line powered. Minimum 18V DC talk battery voltage with a minimum
loop current of 20mA. Loop current may be boosted on low current lines with a Viking
model
TBB-1B
Talk Battery Booster (see
DOD# 632
).
Dimensions:
Faceplate: 123.8mm x 79.4mm x 4.6mm (4.875” x 3.125” x 0.18”), Phone:
72mm x 46mm x 42mm (2.84” x 1.8” x 1.65”)
Shipping Weight:
0.45 kg (1.0 lbs)
Operating Temperature:
-34° C to 65° C (-30° F to 150° F)
Humidity:
Standard model: 5% to 95% non-condensing humidity, EWP model: up to
100% humidity
Speaker Volume:
Approximately 62db maximum @ 1m
Ring Voltage:
25V AC RMS minimum (for auto answer)
CPC Disconnect Time:
300ms minimum
REN:
0.8A
Connections:
(2) gel-filled butt connectors
S
S
p
p
e
e
c
c
i
i
f
f
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
E-40-BN
“Oil Rubbed Bronze”
(satin dark brown powder
paint with fine copper metallic)
• Door or gate communication, business delivery entrances
• Use with a
Viking C-200
or
C-250
to control an
E-40
on a single line
• Use with a
Viking C-2000B
to control 1 to 4
E-40
’s and door/gate
control on a single phone line
• Provide unique front and back door chimes and paging when used
with a
Viking SLP-1
,
SLP-4
and
C-2000B
• Residential, commercial and industrial door security
• Use with a
Viking K-1900-5
or
K-1900-30
for automatic speed
dialing on telephone lines or analog PABX/KSU station ports
• Use on any analog PABX station port with programmable ringdown
capability
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
E-40-PB
“Polished Brass”
(with clear gloss powder
paint to prevent tarnishing)
E-40-WH
“Satin White”
(satin white powder paint)
E-40-BK
“Satin Black”
(fine texture satin black
powder paint)
E-40-SS
“Brushed Stainless Steel”
(similar to brushed nickel) Shown with
optional
VE-3x5
box (not included)
