background image

•  ACD/UCD announcements
•  Intercept announcement
•  Announce-only applications
•  School closings
•  Ski reports
•  Night answer
•  Wake-up calls
•  Bank rates/commodity prices
•  Any application where information must be 
    repeated continuously and may require frequent 
    updating
•  Replace existing tape and drum recorders

•  1 minute of record time per channel

•  Remotely recordable

•  Locally recordable using a standard carbon 
    handset or tape player

•  Selectable ring delay per channel

•  Detects CPC signal and disconnects

•  Callers may be transferred after the 
    announcement

•  Messages stored in non-volatile memory (no 
    batteries required)

•  Recording volume LED indicator for 
    consistently high-quality recordings

•  Recognizes handshake signals from 
    virtually any PABX, Centrex or C.O. line

•  Programmable to repeat announcement

The DVA-1003B is a fully professional, cost-effective three port digital voice announcer,
specifically designed for ACD/UCD, auto attendant, call intercept, night messaging information
provider and other PABX and Centrex announcement applications.

3 Channel Non-Volatile Digital Voice Announcer

with Remote Recording and Transfer Capabilities

VIKING

©

Technical Practice

Telecommunication Peripheral Products

DVA-1003B

Three Channel

Digital Voice Announcer

October 14, 2004

Features

Applications

Sales...(715) 386 - 8861

Made in the U.S.A.

Specifications

Power:  120V AC/12V DC 500 mA, UL listed adapter provided or
-24 to -58V DC @ 100mA maximum
Dimensions:    44mm x  483mm x  127mm (1.75” x 19” x 5”)
Shipping Weight:  3 Kg (7 lbs)
Environmental:  0°C to 32°C (32°F to 90°F) with 5% to 95% non-
condensing humidity
Message Length:  1 minute per channel
Connections:  (3) RJ11 jacks, (3) 4-wire E&M jacks, (3) 1/8 audio
jacks (3) handset jacks, (2) screw terminals
Sampling Rate:  64 K (equivalent)

The  DVA-1003B is factory equipped with 1 full minute of non-volatile recording memory for
each channel.

The DVA-1003B will increase call handling capacity by answering incoming calls on demand,
or on the first ring, and automatically adjusts the announce time to the length of the outgoing
message.  The DVA-1003B will disconnect on CPC and provide instant “rewind” for the next
caller.

http://www.VikingElectronics.com

Summary of Contents for DVA-1003B







Reviews: