VMOR205SS
DMOR205SS
SERVICE MANUAL
In the interest of user-safety, the oven should be restored to its original condition and only parts identical to those specified
should be used.
WARNING TO SERVICE PERSONNEL: Microwave ovens contain circuitry capable of producing very high voltage and
current, contact with following parts may result in a severe, possibly fatal, electrical shock. (High Voltage Capacitor, High
Voltage Power Transformer, Magnetron, High Voltage Rectifier Assembly, High Voltage Harness etc..)
S95M255VMO205
OVER THE RANGE
MICROWAVE OVEN
MODELS
DMOR205SS
VMOR205SS
TABLE OF CONTENTS
Page
PRECAUTIONS TO BE OBSERVED BEFORE AND DURING SERVICING TO
AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY ................... INSIDE FRONT COVER
BEFORE SERVICING ...................................................................................................... INSIDE FRONT COVER
MICROWAVE MEASUREMENT PROCEDURE ..................................................................................................... 2
WARNING TO SERVICE PERSONNEL ................................................................................................................ 4
FOREWORD AND WARNING ................................................................................................................................ 5
PRODUCT SPECIFICATIONS ............................................................................................................................... 6
GENERAL INFORMATION ................................................................................................................................... 6
OPERATION ......................................................................................................................................................... 9
TROUBLESHOOTING GUIDE ............................................................................................................................. 17
TEST PROCEDURE ............................................................................................................................................ 20
TOUCH CONTROL PANEL ASSEMBLY ............................................................................................................. 31
COMPONENT REPLACEMENT AND ADJUSTMENT PROCEDURE .................................................................. 37
PICTORIAL DIAGRAM ........................................................................................................................................ 46
LSI UNIT CIRCUIT ............................................................................................................................................... 47
PRINTED WIRING BOARD ................................................................................................................................. 48
PARTS LIST ........................................................................................................................................................ 49
PACKING AND ACCESSORIES ......................................................................................................................... 54
This document has been published
to be used for after sales service only.
The contents are subject to change
without notice
.
DMOR205SS
VMOR205SS
Range Corporation
111 Front St., Greenwood, MS 38930
Tel: (888) 845-4641
