VIKING GARDEN MT 4097 S, Instruction Manual

Page: 43 / 306

EN
NO
41
SV
FI
DA
PL
0478 192 9804 B - EN
Press bulb (2) in the direction of socket (1)
and hold. Carefully turn bulb (2) and
remove.
● Install the bulb in reverse order.
Push socket (1) into the headlamp
housing.
● Close the engine hood. (
Ö
14.4)
14.16 Fuses
Checking plug-in fuses:
● Stop the engine. ( Ö 12.3)
● Engage the parking brake. ( Ö 8.12)
● Remove the ignition key and keep it in a
safe place.
● Open the battery
compartment. (
Ö 14.17)
Remove plug-in fuses (1). Visually check
whether wire (2) in the plastic is damaged
(burnt through).
Replace damaged fuses.
● Close the battery
compartment. (
Ö 14.17)
Checking the main fuse:
Nominal current:
150 amperes
● Stop the engine. ( Ö 12.3)
● Engage the parking brake. ( Ö 8.12)
● Remove the ignition key and keep it in a
safe place.
● Open the battery
compartment. (
Ö 14.17)
Remove cover (1). Visually check whether
wire (2) is damaged (blown). If the wire is
damaged, fuse (3) must be replaced by a
specialist dealer. VIKING recommends
VIKING specialist dealers.
Replace cover (1).
Fire hazard:
Never bypass the fuses with wire or
foil.
Never use a fuse with a value that
differs from the specified rating
(ampere).
If a new fuse blows within a short
time, an electrical fault (e.g. short
circuit) is the probable cause.
We recommend that you consult a
specialist dealer. VIKING
recommends VIKING specialist
dealers.
Model
Charging
device
Electrics
MT 4097 SX 10 A 10 A
MT 4097 S 10 A 10 A
MT 4112 S 10 A 10 A
MT 4112 SZ 15 A 10 A