PoE Maximum Load Meter w/ Voltage & Power Monitor User Manual
Application Drawing
Important Safety Warning
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The Vi00024 Setup
The Smart Choice for Transmission Solutions
www.vigitron.com
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Use in accordance with the manufacturer’s instructions.
- To reduce the risk of fire or electrical shock, do not expose these products
to rain, moisture, dripping or splashing.
- No objects filled with liquids, such as vases, shall be placed on Vigitron
equipment.
- DO NOT install the unit in a place where the operating ambient tempera
ture exceeds 75°C.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long
periods of time.
- Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as a power
supply cord or plug is damaged, liquid has been spilled, or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
- The network cable is used as the disconnect device and shall remain
readily operable.
Vi00024_UM
Vigitron’s patent pending Vi00024 is an innovative test tool that installation
reliability by measuring PoE capacity at any point of a networks before
installing a camera. The Vi00024 simulates PoE devices and measures the
maximum PoE capacity received from the PoE source over the network. It is
compliant with IEEE 802.3af/at/bt standard up to 74W.
The Vi00024 operates in both Manual and Auto mode. In manual mode the
user can manually increase the PoE consumption of the Vi00024 until it
reaches the maximum available PoE. In the auto mode, the Vi00024 with
the push one bottom can measure maximum available PoE in a few
seconds.
The Vi00024 includes a rechargeable battery that can be charged via a
USB type C connector using any standard USB charger. It is very low power
and with a full charge can operate for several days.
The Vi00024’s compact and light weight construction makes is easy to carry
and use. It is easy to use and helps to speed up installations and prevent
service calls by locating and helping to solve PoE problems.
The Vi00024 can measure Maximum available PoE up to 74W over standard networks.
The Vi00024 can measure Maximum available PoE up to 74W over Extended UTP networks.
Cat 5/6
PoE
328 ft. (100m)
PoE
328 ft. (100m)
PoE
328 ft. (100m)
Vi30208
56VDC
Vi10240
Measuring Maximum PoE over an Extended UTP network
Measuring Maximum PoE over a standard network
PoE Switch
Vi00024
Vi2301A
Vi2301A
Vi00024
PoE
Extended UTP
Power
Mate
TM
Turning On
• Hold down the Button to Turn ON the Vi00024 and view “
Selection
Menu”
on the display .
• In
Selection Menu:
• Press Once for
AUTO Mode
.
• Press Twice for
Manual Mode
Auto Mode
After selecting Auto Mode the Vi00024 will turn on a PoE Load and
increase the load gradually until the PoE source shuts down due to
exceeding its maximum load capacity. Then the Vi00024 will display the
maximum PoE level.
• Press Twice to exit the
Auto Mode
.
Manual Mode
In the
Manual Mode
select the load increase mode:
• Press Once for
Class Mode
• Press Twice for
5W Mode
Class Mode
In this mode select the desired PoE Class.
• Press Twice to exit Manual/Class Mode.
5W Mode
In This mode Press Once each time to increase the PoE load by 5W up
to 74W.
• If time out, Press Once to resume operation.
• Press Twice to exit Manual/5W Mode.
Turning Off
• Hold down the Button for 3 Second to turn off the Vi00024.
• If the Vi00024 is left idle for 1 minute, it will shut down
unit time out
