239
4
-
8 Access
Management
4
-
8.1 Configuration
This section helps you configure the
access management table of the switch,
including HTTP/HTTPS, SNMP, and TELNET/SSH. You can manage the switch over an
Ethernet LAN, or over the internet.
This section helps you configure access management table of the switch. The
maximum entry number is 16. If the application's type match any one of the access
management entries, it will allow access to the switch.
Web Interface
To configure a Access Management Configuration in the web interface:
1.
Select “Enabled” in the Mode of Access Management Configuration.
3.
Click “Add new entry”.
4.
Specify the Start IP Address, End IP Address.
5.
Checked Access Management method (HTTP/HTTPS, SNMP, and
TELNET/SSH) in the entry.
6.
Click “Apply”.
Figure 4-8.1: The Access Management Configuration
