167
3
-
15.6 Port DSCP
The section helps the user to set the basic QoS Port DSCP Configuration settings for
all switch ports to the currently selected stack unit, as reflected by the page header.
Web Interface
To configure the QoS Port DSCP parameters in the web interface:
1.
Click Configuration, QoS, Port DSCP.
2.
Evoke to enable or disable the Ingress Translate and
scroll the classify.
3.
Parameter configuration.
4.
Scroll to select Egress Rewrite parameters.
5.
Click “Save” to save the setting.
6.
If you want to cancel the setting, then you need to click the Reset button.
7.
It will revert to previously saved values.
Figure 3-15.6: The QoS Port DSCP Configuration
