Vigitron MaxiiNet Vi30018, Operational Manual

Page: 7 / 122

Page | 7
2.6 Related
Publications
The following publication gives specific information on how to operate
and use the management functions of the switch.
2.7 Revision
History
The User’s Manual
This section summarizes the changes in each revision of this guide.
Release Date Revision
F30018V1.051
Updating several functions may require rebooting the switch. Rebooting
may take up to several minutes to re-establish a connection from the host
to the switch. It is suggested that when rebooting, you exit your browser
and enter. Also, if you are using your host for other web access, you
periodically clear the browser memory.
1. Ports 17 and 18 are combined ports for either copper (UTP) or fiber
connections. If either port is used, both that port and its associated port
will show as green indicating they are both in use and prevent
connections to both ports.
2. Extended port versions will show as "E" in both the switch icon and
Port Configuration manuals. This indicates they must be connected to an
associated extender to operate. The icon itself will not change. However,
operation can be verified by viewing several of the monitoring screens
such as Port Counter and PoE Settings.
Applies to versions with extended distance ports
Applies to models with fiber port 1-16