Vigitron MaxiiNet Vi30018 Operational Manual Download Page 67

Page: 67 / 122

Page | 67

13.3 Counter
Modes Defined

The 3 different operational modes are:

Field

Description

Transmit Packet & Receive
Packet

This category shows both the received
packet count (excluding the incorrect
packet) and the transmitted packet
count.

Drop Packet & Receive Packet

This category shows the number of
received valid packet and the number
of dropped packet.

CRC error Packet & Receive
Packet

This category shows the received
correct packet and received CRC
error.

Refresh

Press “Refresh” button will aggregate
the number of the counter for all ports.

Clear

Press “Clear” button will clear all
counters.

Switching between modes will clear the previous counter. Entering a
mode will update the counter.

Summary of Contents for MaxiiNet Vi30018



























































































































Search results

Summary of Contents for MaxiiNet Vi30018

Reviews:

Related manuals for MaxiiNet Vi30018

Brands by name

Popular brands

Vigitron MaxiiNet Vi30018, Operational Manual

Search results

Summary of Contents for MaxiiNet Vi30018

Reviews:

Related manuals for MaxiiNet Vi30018

Brands by name

Popular brands