Vigitron MaxiiNet Vi30018, Operational Manual

Page: 62 / 122

Page | 62
NOTE:
The CPU control entry cannot be removed.
12.3 Multi to 1
Setting
Multi-to-1 VLAN is used in CPE side of Ethernet-to-the-Home and is
exclusive to VLAN setting on ”VLAN member setting“. In the other words,
once multi-to-1 is set, the previous VLAN setting will be overridden.
The “disable port” means the port which will be excluded in this setting.
All ports excluded in this setting are treated as the same VLAN group.
In the following example, port 3, port 4, port 6, port 7, port 8 and port 9
are excluded in this VLAN Furthermore these ports are treated as the
member of other VLAN. All ports which are not specified in this table only
communicate with port 1.
CAUTION:
This setting will over ride other VLAN settings.
Select the Destination port:

Select port to be excluded:

Select the ports excludes them form the VLAN and can be used
for other VLANs.

Select “Update”
NOTE:
all ports which are not excluded will be part of the
VLAN.