Vi5004 4-Port Media Converter Installation Manual
Application Drawing
Important Safety Warning
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
IP Camera-end Installation
The Smart Choice for Transmission Solutions
www.vigitron.com
Ethernet Switch/NVR-end Installation
- Connect an approved 12VDC power supply to the power connector of
Vi5004. A power adapter connector is provided to simplify connection.
- Connect the RJ45 connector of the Ethernet switch to the 10/100BaseT
Ethernet port of Vi5004 using a standard Cat5/6 cable of maximum
328 feet (100 m) in length.
- Insert a suitable 100MBps SFP into the SFP socket of the Vi5004. The
SFP needs to match the specification of the fiber optics cable.
- Connect one end of the long fiber optic cable to a SFP module.
The Ethernet link, Fiber link, activity LEDs should be "ON" and "Blink" to
indicate the status of each port.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Install in accordance with the manufacturer’s instructions.
- This installation should be made by a qualified service person and should conform
to all local codes.
- DO NOT bundle UTP or Coax signals in the same conduit as high-voltage wiring.
- To reduce the risk of fire or electrical shock, do not expose these products to rain,
moisture, dripping or splashing.
- No objects filled with liquids, such as vases, shall be placed on Vigitron equipment.
- DO NOT install the unit in a place where the operating ambient tempera ture
exceeds 70° C.
- Make sure that the external power supply output voltage is in the recommended
range.
- Do not install near any heat sources such as radiators, heat registers, stoves or
other apparatus that produce heat.
- Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of
time.
- Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as a power supply cord or plug is
damaged, liquid has been spilled, or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
- The powe plug is used as the disconnect device and shall remain readily operable.
Vi5004-UM
Vigitron’s Vi5004 is a 4-port fiber optic media convertor that enables Ethernet
signals to be transmitted over fiber optic cables. It enable UTP Ethernet to
connect to fiber to meet long distance transmission requirement or where
fiber is already installed. The use of fiber SFPs enables compatibility with all
major single and multimode fiber optics cables to achieve transmission
distances depending on the cable and SFP type. The Vi5004 can use
virtually any MSA compliant SFPs.
The Vi5004 is an ideal solution for converting existing analog fiber
infrastructures to IP systems. It provides a unique, reliable, and cost effective
solution to meet long distance transmission application requirements. Up to
four Vi5004 units can be instaled in a Vi5000R rackmount shelf to povide up
to 16 ports of rack mountable fiber optics media converters.
- Insert a suitable 100MBps SFP into the SFP socket of the Vi5001. The
SFP needs to match the specification of the fiber optics cable.
- Connect the fiber connector of the optical wire to the SFP.
- If the IP Camera is non-PoE use an approved 12VDC or 48VDC power
adapter to power the Vi5001.
- If the IP Camera is PoE enabled use the Vi0017 or another approved
48VDC power adapter to power the Vi5001.
- Connect the IP camera RJ45 connector to the “10/100BaseT Ethernet” port
of Vi5001 using a standard
Cat5/6 cable of maximum 100m in length.
Cat 5/6
Fiber Optics
Network Switch
Adding fiber optic connection to Network switches
Data
Long Distance Fiber
PoE Camera
PoE Camera
Vi5001
Vi5004
Power
Supply
Data
Long Distance Fiber
Vi5001
Power
Supply
Data
Long Distance Fiber
PoE Camera
Vi5001
Power
Supply
Data
Long Distance Fiber
PoE Camera
Vi5001
Power
Supply
Data +
PoE
328 ft. (100m)
Data +
PoE
328 ft. (100m)
Data +
PoE
328 ft. (100m)
Data +
PoE
328 ft. (100m)
Power
Supply
The Vi5004 along with Vi5001 enables addging 100Base-T fiber connection to any network
switch. Each port of Vi5004 can be individually powered by PoE or local power supply SFPs
need to be added to Vi5004 and Vi5001 to match the fiber optic cables.
WARNING! - To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture. This apparatus shall not be exposed to
dripping or splashing and no objects filled with liquids, such as vases shall
be placed on the apparatus.
WARNING! - This apparatus is a Class I product. This product must
be connected to a mains socket outlet thru an AC to DC Power supply.
WARNING! - The mains plug is used as the disconnect device and
shall remain readily operable.
Max
ii
Fiber
TM
Rack mount four 4-port Vigitron transmission devices
The Vi5000R provies an easy way to rack mount up to four Vi5004s to make a 16 port media
converter. The Vi5000B can be used to cover empty spaces of Vi5000R.
Vi5004
Vi5004
4 x Vi5000R
Vi5000R
Vi5004
Vi5004
