•
After switching back to the App, you will have the page to
set up the Wi-Fi of the camera.
• Select your WiFi router in the list, then input Password and
Save.
• The camera will start to connect to the router, you will hear
the camera play a special tone that means it was connected
to the router successfully.
•
Name it and set the password, then start to use the camera.
Setting Up Camera
Power up
Connect the power cable into power connector of the camera, and
plug the power adapter into an outlet.
Note:
Please DO NOT use
an
Ethernet cable to connect
the
Smart
Camera
to LAN before camera setup process is done.
Pairing with system
Tap “+” Add accessory to scan QR codes printed on the camera, you
will be guided to connect to Camera by connecting the AP’s name
which started with IPcam***.
WiFi Settings
I’ve Already Connected My Camera to Internet, But I Can’t Connect It in
the
App.
Make sure you used the right QR code during the pairing section.
Make sure you are using the 2.4GHz Wi-Fi, the camera can’t support 5GHz yet. The camera supports IPV4 only. DHCP Server/Services should be enabled
on the router setting.
If you are using a firewall, all ports from 10000 to 65635 of your cameras IP address should be allowed for in/out in the firewall rule to allow data from
the camera.
I Can’t Save the Snapshots.
The App will need access to your phone's album to save the snapshots. The authorisation might need to be
approved while using the
function for the
first time in some phones
.
If you click the ‘No’ option during the authorisation, you might need to enable it in the system setting menu.
How to Reset My Camera Network?
If you relocate the camera, launch the APP and tap “Network Setting” on the “Accessory Setting” page. Press and hold the reset button on the back of
the camera for 3s after the camera is powered on, it’ll make a tone and enter AP mode.
How to Reset My Camera?
PLEASE MAKE SURE YOU CLEARLY UNDERSTAND THE RESULT OF RESETTING:
ALL DATA WILL BE ERASED INCLUDING THE INTERNET SETTINGS.
Press and hold the reset button on the back of the camera for 10s after the camera is powered on. After successfully resetting, it will make a tone which
means the reset is done and the camera enters AP mode.
FAQ
Features
Designed for use with VIGILATE Smart alarm systems, the VIGIPTZ Indoor Camera is a wireless Internet based camera that provides outstanding
performance.
This IP camera is easy to configure and operate via the VIGILATE Control App. It uses Access Point technology to help the camera connect to wireless routers
fast and easily. By ultising global oversea servers, users can easily watch the live video or recorded videos on their phone from anywhere anytime.
Video Resolution 1920x1080@30FPS, Auto IR-LED illumination with auto IR-Cut Switch, 8 IR LEDs, IR Night vision range
(
30
meters), Wi-Fi compliant with
IEEE 802.11b/g/n, 2.4GHz band Support, WEP,WPA-PSK and WPA2-PSK Encryption, Support recording and playback via micro SD Card, up to 128GB.
Compatible with ONVIF Protocol H.265 main profile video compression format.
Parameters
Camera
Image
S
ensor
1/2.9" 1080P CMOS
1920(H)x1080
(
V
)
WDR
Digital WDR
N
oise Reduction
3D DNR
Da
y/Nig
ht control (IR
-
Cut)
Aut
o(ICR) /
C
olor /
B
lack&
White
Motion detection
S
upported
SD
Card
S
upported, up to 128GB
IR distance
30m
Lens
Focal Length
4mm
Max Aperture
F2.4
Focus control
Fixed
Diagonal Angel of View
114°
V
ideo
E
ncode
Resolution
1080P (1920x1080)
VGA (640x352)
V
ideo Bitrates
V
ideo Frame Rate
25fps@1080P
Image snapshot
S
upported
General
Power
S
upply
DC 5V/1A
Ha
rd Reset
S
upported
Power Consumption
<5W
Wor
k
ing
E
n
vi
ronment
-10
℃
~+55
℃
,10%~90% RH
Dimensions
102x100x120mm
Weight
265g
N
etw
ork
N
etw
ork
Protocol
H
TTP, FTP, T
CP/I
P, UDP
, S
MTP
, DHC
P
, NT
P,
UPN
P
, DDNS
S
mart Phone
iOS(9.0 or ab
o
v
e),Andr
oid(5.0 or ab
o
v
e)
W
i-
F
i (802.11b/g/n), 2.4G onl
y, supports
WEP/W
P
A-PSK/W
P
A2-PSK enc
ryption
P2P
S
upported
User Guide
VIGIPTZ
Wireless Pan-Tilt Camera
H.265 main profile
Wi-Fi
64K
bps ~ 8Mbps
Installation Guide
N
ote: Prior to installation ensure that the installation en
vi
ronment can support a
t least 3 times the
weigh
t of the
camera.
And do not place objects on t
op of the
camera.
1) Drill pilot holes in the position that you wish the camera to be seat
ed using a 3/16 drill bi
t.
2)
S
crew the mount on the wall with two screws pro
vide
d.
3)
Loosen the thumb screws to adjust the mount to the desired position.
4)
Once the position is set, tighten the screws securely.
Reset
Power
LAN
