Document: LT0439 Vigilant
MX1-Au
Operator Manual
Issue 1.73
23 October 2018
Page 5-3
The POINTS
F1
option in the Recall menu (see Figure 5-2) allows the
off-normal points to be recalled.
Fig 5-3 – Recall Points Display
Press:
OFF NML
F1
to show all the off-normal points (i.e., not in a
Normal state)
DIRTY
F2
to show all points in the dirty condition
FAULTS
F3
to show all points in fault
DISABLES
F4
to show all disabled points.
If your panel is connected to a network you will see the following menu
after you select one of the menu items:
Fig 5-4 – Recall Points Network Menu
Press:
LOCAL
F1
to show the selected points on the local
MX1
ALL SIDS
F2
to show the selected points on the network
ENTR SID
F3
to show the selected points on a particular
MX1
panel. This will prompt you to enter the SID of the panel to search.
The points are displayed in numerical order, starting with the lowest
numbered point. An example is shown in Figure 5.5.
Recalling Off-Normal Points and Zones
O
f
f
-
N
o
r
m
a
l
P
o
i
n
t
s
Recall points : xxxxx
|
LOCAL
|
ALL SIDS
|
ENTR SID
Select SIDs to search |
Recall points
|
OFF NML
|
DIRTY
|
FAULTS
|
DISABLES
Recall
Points
