TrueSafe CO User Manual
Vighnaharta Technologies Pvt. Ltd. Page
6
of
8
Getting Started
Understanding controls of CO Sensor
No.
Switches Used
1
Test Key
Can be Use to Test Co Detector
2
ON/OFF Switch
To Power ON and OFF the CO Detector
No.
Visual Indications
1
Alarm
RED LED indicates alarm condition
Buzzer will be ON
2
Power ON
GREEN LED blink every minute, shows that the system
is ON
3
Test Key
Can be Use to Test Co Detector
4
ON/OFF Switch
To Power ON and OFF the CO Detector
5
End battery life
Buzzer will be beep once per minute
Power ON the Co Detector:
To power the system, Use ON/OFF switch. Separate switch has been provided to power ON
and OFF the Co Detector.
When user power ON the Co Detector then System will check itself and it will show some
indications to user that device is in working state, given below:
Power ON Indications will be:
RED and GREEN LED will flash with buzzer for 200ms
