VB-STND-003
Motorized Trolley Cart
Quick Setup Guide
Guide rapide début
Guía de configuración rápida
Konfigurationskurzanleitung
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
CE Conformity for European Countries
The device complies with the relevant section of the EMC Directive 2014/30/EU, Low Voltage Directive
2014/35/EC, Eco-Design Directive 2009/125/EC, RoHS Directive (RED) 2011/65/EU
Following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive
2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose the equipment as unsorted
municipal waste, but use the return and collection system according to local law.
CAUTION
1
This Cart for use only with specific ViewSonic Commercial Touch
Display.
See apparatus instructions. Use with other models is capable of
resulting in instability causing possible injury.
TIPPING HAZARD!
DO NOT move Cart with Display in highest position. DO NOT push
Cart from front or back of Lift. DO NOT move Cart over cords or
uneven, dirty, soft or sloping surfaces. DO NOT move Cart by
pushing on Display. Failure to comply with this caution may result in
Cart instability leading to equipment damage or personal injury.
Max.weight loading is 100kg
1.Duty cycle : please take rest for 18minutes for every
2 minutes continuous operation of the lift/ tilt
mechanism.
2.Please have the panel to the lowestposition while
moving the trolley.
2
3
4
Physical Dimensions
