ViewSonic PJD6250L User Manual Download

Page: 28 / 87

• If so, you can continue with this procedure.

• If not, you will need to reassess which method you can use to connect to the device.

To connect the projector to a Component Video source device:

1. Take a VGA (D-Sub) to HDTV (RCA) cable and connect the end with 3 RCA type

connectors to the Component Video output sockets of the Video source device.
Match the color of the plugs to the color of the sockets; green to green, blue to
blue, and red to red.

2. Connect the other end of the cable (with a D-Sub type connector) to the

COM-

PUTER IN 1

COMPUTER IN 2

socket on the projector.

Important

• If the selected video image is not displayed after the projector is turned on and the

correct video source has been selected, check that the Video source device is turned on

and operating correctly. Also check that the signal cables have been connected

correctly.

Connecting an S-Video source device

Examine your Video source device to determine if it has an unused S-Video output
socket available:

• If so, you can continue with this procedure.
• If not, you will need to reassess which method you can use to connect to the device.

To connect the projector to an S-Video source device:

1. Take an S-Video cable and connect one end to the S-Video output socket of the

Video source device.

2. Connect the other end of the S-Video cable to the

S-VIDEO

socket on the projec-

tor.

Important

• If the selected video image is not displayed after the projector is turned on and the

correct video source has been selected, check that the Video source device is turned on

and operating correctly. Also check that the signal cables have been connected

correctly.

• If you have already made a Component Video connection between the projector and this

S-Video source device using Component Video connections, you need not connect to

this device using an S-Video connection as this makes an unnecessary second

connection of poorer picture quality. See

"Connecting Video source devices" on page

for details.

Connecting a composite Video source device

Examine your Video source device to determine if it has a set of unused composite
Video output sockets available:

• If so, you can continue with this procedure.
• If not, you will need to reassess which method you can use to connect to the device.

To connect the projector to a composite Video source device:

Summary of Contents for PJD6250L
























































































Search results

Summary of Contents for PJD6250L

Reviews:

Related manuals for PJD6250L

Brands by name

Popular brands

ViewSonic PJD6250L, User Manual

Search results

Summary of Contents for PJD6250L

Reviews:

Related manuals for PJD6250L

Brands by name

Popular brands