25
Optimizing the image
Selecting a picture mode
The projector is preset with several predefined picture modes so that you can choose one to
suit your operating environment and input signal picture type.
To select an operation mode that suits your need, you can follow one of the following steps.
•
Press
Color Mode
repeatedly until your desired mode is selected.
•
Go to the
PICTURE > Color Mode
menu and press
/
to select a desired mode.
Picture modes for different types of signals
The picture modes available for different types of signals are listed below.
1.
Brightest mode
: Maximizes the brightness of the projected image. This mode is
suitable for environments where extra-high brightness is required, such as using the
projector in well lit rooms.
2.
Dynamic mode
: Is designed for presentations under daylight environment to match
PC and notebook coloring. In addition, the projector will optimize the image quality
using the dynamic PC function in accordance with the projected contents.
3.
Standard mode
: Is designed for presentations under daylight environment to match
PC and notebook coloring.
4.
ViewMatch sRGB mode
: Switches between high brightness performance and
accurate color performance.
5.
Movie mode
: Is appropriate for playing colorful movies, video clips from digital
cameras or DVs through the PC input for best viewing in a blackened (little light)
environment.
Using Screen Color
In the situation where you are projecting onto a colored surface such as a painted wall which
may not be white, the
Screen Color
feature can help correct the projected picture’s colors to
prevent possible color difference between the source and projected pictures.
To use this function, go to the
DISPLAY
>
Screen Color
menu and press
/
to select a
color which is closest to the color of the projection surface. There are several precalibrated
colors to choose from:
Whiteboard
,
Greenboard
, and
Blackboard
.
This function is only available when a PC input signal is selected.
Fine-tuning the image quality in user modes
According to the detected signal type, there are some user-definable functions available.
You can make adjustments to these functions based on your needs.
Adjusting Brightness
Go to the
PICTURE
>
Brightness
menu and press
/ .
The higher the value, the brighter the image. And the
lower the setting, the darker the image. Adjust this
control so the black areas of the image appear just as
black and that detail in the dark areas is visible.
Adjusting Contrast
50
-30
+80
Summary of Contents for PJD5351LS
Page 72: ......
