13
Initial Setup
This section provides detailed instructions for setting up your monitor.
Wall Mounting
Refer to the table below for the standard dimensions for wall mount kits.
NOTE:
For use only with a UL certified wall mount kit/bracket. To obtain a wall-
mounting kit or height adjustment base, contact ViewSonic® or your
local dealer.
Maximum
Loading
Hole pattern
(W x H)
Interface Pad
(W x H x D)
Pad Hole
Screw Specification
& Quantity
14 kg
100 x 100 mm 115 x 115 x 2.6 mm Ø 5 mm
M4 x 10 mm
4 pieces
NOTE:
Wall mount kits are sold separately.
1.
Turn off the device and disconnect all cables.
2.
Place the device on a flat, stable surface with the screen facing down.
3.
Ensure the adjustable stand is fully retracted.
4.
Attach the mounting bracket to the VESA mounting holes at the rear of the
monitor. Then secure it with four (4) screws (M4 x 10 mm).
Type-C
Out
HDMI
HDMI
USB 3.0
5V/2A
100 mm
100 mm
5.
Follow the instructions that come with the wall mounting kit to mount the
monitor onto the wall.
