background image

20

Energy statement for power generation and power consumption

The current situation of power generation and power
consumption can be checked.

The following time periods can be called up:

Current month

Last month

Current year

Last year

Energy statement in conjunction with a power stor-
age system:

The data displayed for power consumption and power
export does not differentiate between power from the
power storage unit and power from the public grid.

1. 

In the standard menu, use     to call up the
Energy cockpit.

2. 

Tap  .

3. 

Tap on the required period.

The energy statement is displayed as a graphic.

The grey-yellow area shows the energy con-
sumed.

indicates the energy drawn from the power
grid

The yellow area shows the energy generated.

indicates the energy exported to the grid

DHW cylinder temperatures

You can check the following information and functions
for the DHW cylinder:

DHW temperatures

Current heating activity:

Upper red arrows: Heating by the gas condensing
module

Lower red arrows: Heating by the fuel cell

Starting a one-off cylinder heat-up (only if cylinder
heating is not active in the current operating mode)

1. 

In the standard menu, use     to call up the
Energy cockpit.

2. 

Tap on the DHW cylinder to call up further temper-
atures.

Starting a one-off cylinder heat-up

Tap the following on-screen buttons:

1. 

, to start a one-off cylinder heat-up by the boiler.

The DHW cylinder is heated to the set DHW tem-
perature.
To terminate cylinder heating early, tap   again.

2. 

 to confirm

Energy status of the heat generator

You can check the following information on the energy
status and operating data for the heat generator:

Gas condensing boiler:

Current output

Hours run

Burner runtime

Burner starts

Gas consumption

Today

Last 7 days

Current month

Last month

Gas consumption history

Fuel cell:

Electrical output

Thermal output

Power exported

Power drawn from the grid

Hours run

Power generation

Fuel cell starts

Gas consumption

Today

Last 7 days

Current month

Last month

Gas consumption history

Power generated

Today

Last 7 days

Current month

Last month

Production coverage

Demand coverage

Power generated history

Power exported to the grid history

Operation

Energy cockpit

 (cont.)

5835784

Summary of Contents for Vitovalor PT2

























































Reviews: