23
Set time phase 4 for this. During this time, DHW will be
heated to the second set DHW temperature value.
Note
■
A start and stop time must be set for the 2nd and 3rd
time phase.
■
The second and third phases may fall within the
standard mode period.
DHW heating once, outside the time program
Note
The operating program
"Heating and DHW"
or
"DHW
only"
must be set for at least one system heating cir-
cuit.
Enable
"Comfort mode"
ately disable it again. This prevents unintentionally run-
ning the central heating at standard room temperature.
Setting the time program for the DHW circulation pump
Factory setting:
"Automatic"
The DHW circulation pump operates in parallel to the
DHW heating time program.
You can change this time program
individually
in
accordance with your requirements.
Tap the following buttons:
1. "Menu"
2. "DHW"
3. "DHW circulation time program"
4. "Individual"
5.
Press
OK
to confirm
For how to set a time program, see page 14.
Note
Between the time phases the DHW circulation pump
remains off.
Stopping DHW heating
Tap the following buttons:
1. "Menu"
2. "DHW"
3. "DHW temperature"
4.
for 10 °C
5.
Press
OK
to confirm
DHW heating
Time program
(cont.)
5546 498 CA
