background image

48

Solar circuit pump

In conjunction with solar thermal systems.
The solar circuit pump transports the heated heat
transfer medium from the collectors into the indirect
coil of the DHW cylinder.

Set temperature

Default temperature that should be reached; e.g. set
DHW temperature.

Cylinder primary pump

Circulation pump for heating the DHW in the DHW cyl-
inder.

Drinking water filter

A device that removes solids from the drinking water.
The drinking water filter is installed in the cold water
pipe upstream of the DHW cylinder or the instantane-
ous water heater.

Weather-compensated heating mode

See "Heating mode".

DHW circulation pump

The DHW circulation pump transports the DHW
around a ring pipeline between the DHW cylinder and
the draw-off points (e.g. hot tap). This ensures that hot
water is rapidly available at the draw-off point.

Information on disposal

Disposal of packaging

You heating contractor will dispose of the packaging of
your Viessmann product.

DE:

Packaging waste is channelled for recycling to a
certified disposal contractor in line with statutory
regulations.

AT:

Packaging waste is channelled for recycling to a
certified disposal contractor in line with statutory
regulations. Use the ARA statutory disposal sys-
tem (Altstoff Recycling Austria AG, licence num-
ber 5766).

Final decommissioning and disposal of the heating system

Viessmann products can be recycled. Components
and fluids from your heating systems are not part of
ordinary domestic waste.
Please contact your heating contractor in connection
with the correct disposal of your old system.

DE:

Operating fluids (e.g. heat transfer medium) can
be disposed of at municipal collection points.

AT:

Operating fluids (e.g. heat transfer medium) can
be disposed of at municipal collection points
(ASZ).

Appendix

Terminology

 (cont.)

5592667

Summary of Contents for Vitotronic 200 KO1B





















































Reviews: