12
If you require central heating, check the following
points:
■
Have you selected the heating circuit?
For settings see chapter "Selecting the heating cir-
cuit".
■
Have you set the required room temperature?
■
Have you selected the correct operating program?
■
Have you selected the required time program?
Selecting the heating circuit
Heating can, if necessary, be split over several heating
circuits.
■
In the case of heating systems with several heating
circuits, for all central heating settings, first select the
heating circuit where you want to make a change.
■
This selection is not possible in heating systems with
only one heating circuit.
If you or your heating contractor have renamed the
heating circuits (to "Flat" for example), that name will
be shown in place of
"Heating circuit 1"
.
Setting central heating temperatures
Setting the room temperature for standard heating mode
Default display
1.
"Menu"
2.
"Heating"
3. Select the required heating circuit.
Heating zone regulated circuit 1
Reduced
room temperature
Op mode
Time program
Heating
Holiday program
Set temperature
day
Temperature level
Diagram
Fig.6
4.
"Set temperature, day"
Set temperature, day
21.0°
OK
Fig.7
5. +/- for the required temperature
6. Press
"OK"
to confirm
Setting the room temperature for reduced heating mode (night setback)
Default display
1.
"Menu"
2.
"Heating"
3. Select the required heating circuit.
4.
"Reduced room temperature"
Reduced room temperature
19.0°
OK
Fig.8
Central heating
Central heating settings
5677 786 GB
Summary of Contents for Vitotrol 350
Page 43: ...43 5677 786 GB...
