11
If you require central heating, check the following
points:
■
Have you selected the heating circuit?
For setting see chapter "Heating circuit selection".
■
Have you set the required room temperature?
■
Have you set the correct operating program?
■
Have you set the required time program?
Heating circuit selection
If required, the heating of your rooms can be split over
several heating circuits.
■
In the case of heating systems with several heating
circuits, for all central heating settings, first select the
heating circuit for which you want to make a change.
■
This selection is not available in heating systems
with only one heating circuit.
If you or your heating contractor have renamed the
heating circuits (e.g. to "Apartment" or similar), that
name is shown in place of
"Heating circuit 1"
.
Setting temperatures for central heating
Setting the room temperature for standard heating mode
Default display
1.
"Menu"
2.
"Central Heating"
3. Select the required heating circuit.
Fig. 5
4.
"Set temperature, day"
5. +/- for the required temperature
6. Press
"OK"
to confirm
Setting the room temperature for reduced heating mode (night setback)
Default display
1.
"Menu"
2.
"Central Heating"
3. Select the required heating circuit.
4.
"Reduced room temperature"
5. +/- for the required temperature
6. Press
"OK"
to confirm
Operating program
Further information can be found in chapter
"Terminology" in the appendix.
Setting the operating program
Central heating
Central heating settings
5778 774 GB
Summary of Contents for Vitotrol 350-C
Page 42: ...42 5778 774 GB...
Page 43: ...43 5778 774 GB...
