16
0
4.
Use / to select
"SERVICE"
.
0
5. OK
to confirm
0
6.
Use / to select
"TSP-PARAM-
ETER"
.
0
7. OK
to confirm
0
8.
Use / to select the required
parameter.
For information on the
parameters, see the instal-
lation and service instruc-
tions for the heating circuit
extension kit.
0
9. OK
to confirm
10.
Set the required value with +/-.
11. OK
to confirm
Further settings
1.
Press
MODE
.
2.
Use / to select
"SETTINGS"
.
3. OK
to confirm
4.
Use / to select
"SERVICE"
.
5. OK
to confirm
6.
Use / to select the required set-
ting.
See following chapter.
7. OK
to confirm
Temperature balancing (wall compensation)
If the controller is mounted in an unfav-
ourable installation location, the room
temperature displayed may deviate
from the actual room temperature. The
temperature deviation can be adjusted
with a correction value.
1.
Use / to select
"WALL
COMP"
.
2. OK
to confirm
3.
Use +/- or the rotary selector to set
the required corrected temperature.
4. OK
to confirm
Commissioning and adjustment
Setting the mixer extension kit parameters
(cont.)
5837759
Summary of Contents for VITOTROL 100 OT
Page 26: ...26 5837759 ...
Page 27: ...27 5837759 ...
