8
Actual cylinder temperature curve
Tcylb today
12
Collector temperature curve
Tcol today
12
Heat amount in kWh
HM 1
7
5
5
3
3
6
1
Note
The bar on the very right indicates the
value in kWh for the current day.
Calling up messages
Press the following keys:
1.
for the
"Main menu"
.
2.
for
"Messages"
.
3. OK
to confirm.
4.
to display further messages
(see table below).
"Messages:"
Explanation
No fault
There is no fault at the solar control unit.
"Loading cyl"
(only with several consum-
ers)
The display shows which consumer is being heated.
"Pause cyl"
(only with several consum-
ers)
Only if the
"Cyclical heating"
function has been ena-
bled by your heating contractor:
Pause in the heating of the displayed consumer.
"Cyl. set"
The consumer displayed has reached its set value.
"Fault"
A fault has occurred at the solar control unit (to check
the cause, see page 12).
"SW version"
Software version (only for service engineers)
"HW version"
Hardware version (only for service engineers)
Scanning options
Calling up actual values
(cont.)
5608 437 GB
