16
■
Calls up the main menu.
■
Takes you one step back.
To select a menu or adjust values.
OK
Confirms your selection or saves the setting
made.
Special key combinations:
■
Direct to system overview from a menu:
press and hold for approx. 3 s.
■
Establishing internet connection:
In the home screen, press and hold
OK
for
approx. 3 s.
■
Switching WiFi on and off:
+
OK
: Press and hold simultaneously for
approx. 3 s.
Overview of the "Main menu"
In the main menu, you can check and adjust all of the
settings for the appliance's range of functions. You can
find the menu overview on page 55.
Available menus:
■
Trade fair mode (if set by your contractor – heating,
DHW and frost protection are not active)
■
Active messages (if there are any current messages)
■
Quick options
■
Temperature levels
■
Turn on/off
■
WiFi
■
Time programs
■
Consumption
■
Solar yield
■
Information
■
Settings
■
For your flue gas inspector only:
Test mode
Tap the following buttons:
1.
Call up the home screen.
2.
press and hold for approx. 3 s.
3.
for the required menu
4. OK
to confirm
Operating program
Operating programs for central heating and DHW heating
Note
The operating programs for central heating and DHW
heating can be set separately or all together for the
entire system.
Operating program
Function
Central heating
"Heating circuit"
"ON"
The rooms of the selected heating circuit are heated in accordance
with the specified room temperature or flow temperature and the
time program (see chapter "Central heating").
Note
In room temperature-dependent operation, a time program for cen-
tral heating can only be set at the room temperature controller: See
the operating instructions for the room temperature controller.
"Heating circuit"
"OFF"
■
No central heating
■
Frost protection for the heat generator is active.
Operation
On-screen buttons
6172108
Summary of Contents for Vitodens 200-W System
Page 71: ...71 6172108...
