Quick Start-up Guide
6167 990 - 03 09/2021
Before you install the boiler;
This boiler is configured for Natural Gas from the factory. If conversion to
Propane Gas is required, the conversion kit supplied with the boiler must be used.
This guide is designed to provide a quick overview to the licensed professional
heating contractor for installing the Vitodens 200-W B2HE boiler. It is NOT
a substitute for the technical support literature supplied with the boiler and
accessories.
The technical support literature for each product contains the necessary
safety and national/local code requirements which, if not followed exactly,
may lead to property damages, personal injuries and/or loss of life. Viessmann
Manufacturing assumes no responsibility for damage(s) of any kind caused by
inappropriate use of this manual and/or failure to read the technical literature
provided which may also render the warranty null and void.
Codes
The installation of this unit shall be in accordance with local codes or, in the
absence of local codes, use CAN/CSA-B149.1 or .2 Installation Codes for
Gas Burning Appliances for Canada. For U.S. installations use the National
Fuel Gas Code ANSI Z223.1. Always use latest editions of codes.
In Canada all electrical wiring is to be done in accordance with the latest
edition of CSA C22.1 Part 1 and/or local codes. In the U.S. use the National
Electrical Code ANSI/NFPA 70. The heating contractor must also comply with
both the Standard for Controls and Safety Devices for Automatically Fired
Boilers, ANSI/ASME CSD-1, and the Installation Code for Hydronic Heating
Systems, CSA B214-01, where required by the authority having jurisdiction.
for use by a licensed professional heating contractor
for typical installations
Vitodens 200-W, B2HE
Models 85 to 199
Wall-Mounted, gas-fired condensing boilers
On demand domestic hot water with Combi
boiler
Heating input: 8.5 to 199 MBH (2.5 to 58.3 kW)
H
H
Unpacking and Included with Boiler
Unpacking and Included with Boiler
1
Unpack and set aside
(e.g. the front cover panel,
the documentation package,
installation fittings, etc.)
Boiler Installation Dimensions and Mounting Details
Boiler Installation Dimensions and Mounting Details
2
Ensure that the boiler bracket and boiler are securely fastened and level.
IMPORTANT
Refer to the “Dimensions and Installation” sections of the B2HE
Installation and Service Instructions for more detail.
