56
Note
The display and setting of some parameters is
dependent on:
■
Heat generator
■
Connected accessories and the functions associated
with them
Tap the following buttons:
1.
and
OK
simultaneously for approx. 4 s, then
release.
2.
Use
/
to select
"b.2"
for system configura-
tion.
3. OK
4.
Use
/
to select the parameter for adjust-
ment. See tables below.
5. OK
6.
/
for the required value.
7. OK
Parameter
Note
Parameter values in bold are factory settings.
1 "Set flow temperature for external demand"
Setting
Explanations
Set flow temperature for external demand
70
Set flow temperature in the delivered condition 70 °C
20 to 82
Set flow temperature adjustable from 20 to 82 °C in
1 °C increments
2 "Primary circuit pump operating mode"
Setting
Explanations
1
"Automatic"
Switched on regardless of current temperature level
7
Switched off in reduced mode (in conjunction with
constant operation with time program) or if there is no
demand via the room thermostat.
System configuration (parameters)
Calling up parameters
6167586
Parameter
