background image

27

The menu shows "Apartment" for 

"Heating circuit 2"

.

Apartment

Set reduced room temp

Select with

(

Set room temperature

Economy mode

Party mode

ß

22°C

Ù

Ú

HC2

Fig. 21

Setting the preferred heating circuit for the standard menu

If your heating system has 

several

 heating circuits,

you can select the heating circuit to be displayed in the
standard menu.

Extended menu
1.
2.

"Settings"

3.

"Standard menu"

4. Select the heating circuit:

"Heating circuit 1"

 (for heating circuit 1)

"HC1"

 is displayed

"Heating circuit 2"

 (for heating circuit 2)

"HC2"

 is displayed

"Heating circuit 3"

 (for heating circuit 3)

"HC3"

 is displayed

Setting the time and date

The time and date are factory-set. If your heating sys-
tem has been shut down for a prolonged period, you
may need to reset the time and date.

Extended menu
1.
2.

"Settings"

3.

"Time / Date"

4. Set the time and date.

Setting the language

1.  Extended menu:

2.  "Settings"

3.  "Language"

4. 

Select the required language.

Setting the temperature unit (°C/°F)

Factory setting: °C

1.  Extended menu:

Further adjustments

Naming heating circuits

 (cont.)

5814953

Summary of Contents for VITOCROSSAL CI

















































Reviews: