21
Only in conjunction with Vitoconnect, type OT2
If you want to heat your rooms to a higher or lower
temperature for a limited time period, independently of
"Time program"
, activate "Comfort mode".
■
The rooms are heated to the set "Comfort mode"
temperature.
■
Firstly, the DHW is heated to the set DHW tempera-
ture, before central heating.
Setting Comfort mode
Press operating button
A
and hold for approx. 1 sec-
ond, but no longer than 5 seconds: See chapter "Dis-
play and controls".
LED pulsates white:
"Comfort mode" is on.
Ending Comfort mode
About the Vitoconnect or Vitotrol
You have 4 options for ending "Comfort mode":
■
Press operating button
A
again briefly for approx.
1 second, but no longer than 5 seconds: See chapter
"Display and controls".
Or
■
"Comfort mode" ends automatically when the set
room temperature is changed via the Vitotrol 100,
type OT1.
Or
■
"Comfort mode" ends automatically when the Vito-
connect restarts.
Or
■
"Comfort mode" ends automatically after 24 hours
(delivered condition).
About the ViCare app
You have 2 options for ending "Comfort mode" via the
ViCare app:
■
Tap
"Manual"
"CLOSE"
.
Or
■
"Comfort mode" ends automatically if the operating
program is changed via the ViCare app.
Access point mode
Activate access point mode for the device so that you
can access legal information online, e.g. open source
licences, or to change the WiFi router settings.
Enable access point mode, e.g. after replacing the
WiFi router.
Enabling access point mode
Press and hold down
A
for longer than 5 seconds, but
no longer than 30 seconds: See chapter "Display and
controls".
LED
illuminates green:
Access point mode is active.
Disabling access point mode
1.
Access point mode is disabled automatically after
5 minutes.
Or
2.
Press and hold down
A
again for longer than
5 seconds, but no longer than 30 seconds: See
chapter "Display and controls".
LED
no longer illuminates green.
Access point mode is disabled.
Control functions
Adjusting room temperature temporarily
5834169
Functions
Summary of Contents for VITOCONNECT OPTO2
Page 28: ...28 Certification Certification 5834169 Appendix...
Page 31: ...31 5834169...
