Vacuum tube collector
Vitosol 300-T
Heat pipe system
Type
SP3A
SP3A
Version
m
2
2
3
Gross area
m
2
2.87
4.32
Absorber area
m
2
2.00
3.02
Aperture area
m
2
2.15
3.23
Dimensions
(overall)
Depth
Width
Height
mm
mm
mm
143
1 420
2 040
143
2 127
2 040
Weight
(incl. thermal insulation)
kg
58
87
Efficient heat transfer
through fully encapsulated
condensers and twin-pipe
Duotec heat exchanger
VITOSOL 300-T
The high performance of the 300-T is based
on the proven heat pipe principle. In heat pipe
systems, the solar fluid does not flow directly
through the tubes. Instead, a small amount of
liquid evaporates in the copper pipe below the
absorber and transfers the heat to the solar
fluid via a heat exchanger.
As well as incorporating heat pipe technology,
the Vitosol 300-T benefits from the easy
installation, high efficiency and high grade
materials found across the Vitosol range.
Highly efficient vacuum tube collector
based on the heat pipe principle for high
operational reliability against overheating
The Sol-titanium coated absorber surfaces,
which are integrated into the vacuum tube,
are not susceptible to contamination
Tubes can be rotated for optimum
alignment with the sun, thereby
maximising the energy yield
Highly effective thermal insulation of the
header casing for minimal thermal losses,
enabling conversion of even low levels of
solar radiation
Patented and highly effective Duotec
twin-pipe heat exchanger
Easy installation through the Viessmann
assembly and connection systems
The Vitosol 300-T offers a high performance vacuum tube collector that meets the
highest demands of efficiency and safety.
Vitosol 300-T
44/45
Summary of Contents for Vitocell 200-B
Page 48: ...Training ...