25
This ensures that, should there
be an error, for example when
detaching a wire, the wires can-
not drift into the adjacent voltage
area.
Note
If two components are connected to the
same terminal, press both cores
together into a single wire ferrule.
!
Please note
In terms of safety, the BUS cable
for the internal/external unit
(12 V or 43 V) does
not
count as
a LV lead.
The BUS cable
must
be routed
together with the 230 V cables.
Note
Make all connections on the control
panel, (see page 28) with flexible
cables to ensure that the control panel
can be placed in the service position
(see page 81).
Installation sequence
Electrical connections
(cont.)
5782 176 GB
Installation
