Safety
VITOBLOC 200 EM-530/660
version
SCR
Installation instructions
11
5
8
41436
GB
3.6
Information regarding particular types of hazard
3.6.1 Thermal hazards
WARNING
In the event of a fault, safety pressure
limiters can be triggered and discharge
hot coolant!
Risk of scalding
Take particular care in this area in the
event of faults!
Wear personal protective equipment
(e.g. protective gloves, safety
goggles).
CAUTION
Pipework and components can
become hot during operation!
Risk of burns!
Wear personal protective equipment
(e.g. protective gloves).
WARNING
Breakage and leaks due to load!
Risk of splashing with hot water or
engine oil
Wear personal protective equipment
(e.g. protective gloves, safety goggles,
safety shoes).
3.6.2 Hazard due to noise
WARNING
Loud noise when working in the CHP
unit installation room if the silencer
hood is open during operation
Irreparable hearing damage
Wear personal protective equipment
(e.g. ear defenders).
3.6.3
Hazard due to radiation
DANGER
The generator's electromagnetic fields
can cause faults in active implants
(e.g. cardiac pacemakers)!
Circulatory collapse
Observe prohibition signs.
Do not enter the danger zone.
DANGER
The generator's electromagnetic fields
can heat up passive implants made of
metal!
Severe internal burns
Observe prohibition signs.
Do not enter the danger zone.
3.6.4
Hazards caused by materials and
substances
DANGER
Leaks in the gas and exhaust system
can cause gas to escape!
Risk of poisoning
No naked flames.
Ventilate the area adequately.
If gas escapes, shut down the machine
and leave the danger zone.
WARNING
Batteries contain sulphuric acid!
Risk of chemical burns
Avoid contact with skin and eyes.
Wear personal protective equipment
(e.g. protective gloves, safety
goggles).
