30
Clean the flat ducts of the plastic ductwork with special
tools, e.g. the cleaning set offered by Lamers
(see
www.lamersequipment.nl
).
Checking the condensate drain
C
B
A
Fig. 31
A
Condensate pan
B
Condensate drain
C
Condensate pipe
1.
Check that the condensate can drain freely. If nec-
essary, clean the condensate pan (see page 29)
and the trap.
2.
Check the condensate pipe at the condensate drain
connector for tightness and possible leaks.
Checking the firm seating of electrical plug-in connectors and cable entries
Commissioning, inspection, maintenance
Cleaning the plastic ductwork (flat)
5793 605 GB
