20
G
B
- remove dust from the sensor access panel (12) with a gentle brush (fig. 8)
- remove the access panel (fig. 9)
- clean the sensor with a dump ear stick and wipe with a dry stick (fig.10)
- re-close the access panel
Fig. 8
Fig. 9
Fig. 10
6.
The UV lamps should be replaced every 3 years. Replace the UV lamps as follows:
- remove all filters
- Gently open each UV lamp power terminal with a flat screwdriver and gently remove the
lamp connector from the terminal (fig. 11)
Fig. 11
- install new UV lamps opening the terminals again. Ensure the metal handles firmly grip
each lamp
- re-install the filters
REMEMBER! DO NOT stare directly into the UV-C lamp when on!
7.
The air ionizer does not require any maintenance.
8.
Store the appliance in its packaging in a dry room when not in use. Clean the appliance as
instructed above before prolonged storage.
Summary of Contents for Haus&Luft HL - OP - 15
Page 42: ...NOTATKI 42 ...
Page 43: ......
