58
Note
Please enter actual values in the "Commissioning" col-
umn
Parameter group
Parameter location
Description
Commission-
ing
Maintenance/
service
Heat pump
Config./ system configura-
tion
Fault, low pressure thresh-
old
Config./ system configura-
tion
Fault, high pressure thresh-
old
Config./ system configura-
tion
Fault, frost threshold, evap-
orator for geothermal probe
Fixed value
Fault, frost threshold, evap-
orator if heat is not drawn
from geothermal probe
Config./ heat pump param-
eters
Maximum flow temperature,
control unit
Config./ heat pump param-
eters
Start delay
Config./ heat pump param-
eters
Restart delay
Heat pump system expan-
sion valve (requires expert
password)
Overheating set value
Config./ heat pump param-
eters
Evaporator pump advance
runtime (primary circuit)
Config./ heat pump param-
eters
Fault, primary circuit flow,
response delay
System/groundwater (heat
source)
Groundwater pump ad-
vance runtime
System/groundwater (heat
source)
Fault, flow, response delay
System/heat pump/logger/
definition (requires pass-
word)
Data recording interval
Time settings
Start delay
Time settings
Restart blocking time
Domestic hot water System/DHW heater/set
value/set value emergency
heating
Emergency heating set
temperature
System/DHW heater/set
value/set value emergency
heating
Set temperature
System/DHW heater/set
value/set value emergency
heating
Pasteurisation set tempera-
ture
Time settings
DHW heating blocking time
Time settings
Pasteurisation function
(time)
Commissioning/service reports
Commissioning report
5789 986 GB
Appendix
