89
Danger
Removing the fuse does
not
switch the power circuit to zero
volt
. Contact with 'live' compo-
nents can lead to serious injury
from electric current.
Before working on the equip-
ment, always ensure that
the
power circuit is also at zero
volt.
Appliance too noisy
Possible causes:
■ Transport bracket not removed or not
secured to the base support: See
page 26.
■ Hose outlets in diaphragm grommets
are not watertight
■ Casing door not tightly sealed: See fol-
lowing diagram.
■ Plinth trims not fitted: See page 66.
■ Excessive clearance between the
plinth trim and floor
Condensation and humidity in the heat pump module
Possible causes:
■ Hose outlets in diaphragm grommets
not watertight: See page 66.
■ Casing door not tightly sealed: See fol-
lowing diagram.
■ Outer panels not sealed diffusion-
proof
Removing the heat pump module
!
Please note
Avoid appliance damage.
Never
put weight on the top, front
or side panels of the appliance.
Troubleshooting
Repairs
(cont.)
5546 267 GB
Service
