For information, refer to the instructions for use of the Profipress, San‐
press and Sanpress Inox systems.
For information, refer to the instructions for use of the Profipress, San‐
press and Sanpress Inox systems.
3.1.3
Required tools
The following tools are required for production of a press connection:
n
pipe cutter or a fine-toothed hacksaw
n
deburrer and coloured pen for marking
n
press machine with constant pressing force
n
Press jaw or press ring with corresponding hinged adapter jaw, suit‐
able for the pipe diameter and suitable profile
Fig. 9: Press jaws
Recommended Viega press machines:
n
Pressgun 5
n
Pressgun Picco
n
Pressgun 4E / 4B
n
Picco
n
Type PT3-AH
n
Type PT3-H / EH
n
Type 2 (PT2)
An Allen key (size 2) is required to pre-set the target values.
Laying and fixing pipes
Length expansion
Press connection
Target values
Handling
Easytop circulation regulation valve, static regulation valve with SC-Contur
17 from 25
