3.3.2
Setting Viega function
The function is deactivated when delivered. If you wish to use
the Viega function, you must program the following settings.
The flush volume for the Viega function can only
be selected if the Viega function has been acti-
vated by choosing a flushing interval.
If no flush volume is selected after activating the Viega
function, the flush volume is set automatically to
the minimum volume.
Requirements:
n
The revision shaft is open and the control can be accessed.
n
The control programming block is not active
n
The programming set is available.
Remove the protective cap of the programming connection from the
control.
Setting the flush interval
Handling
WC flush actuation
35 from 42