Manual Call Recorder Octo | Quarto © Vidicode 2011-2022
70
•
Press NEXT to save and to move on to the next menu item.
10.18
NTP Server Port
NTP server port is the port number through which the Call Recorder
connects to the Network Time Server. The NTP server port is default set
to 123, as is the setting of the port number in most NTP servers. If there
is no direct reason to change the NTP server port it is best left
unchanged.
•
Press CHANGE to change the NTP server port number.
Use the numerical keys to enter the NTP server port number.
•
Press STORE to save the NTP server port number.
•
Press NEXT to save and to move on to the next menu item.
10.19
GMT correction
GMT correction property is used to identify the time zone. An NTP server
normally issues GMT. A GMT correction can be set in units of half hours
from -15:00 to + 15:00.
