66550062-EN - V6.0 - 31/10/21
- 21 -
IPVK/6296 Series IP videokit
IPVK/6296 Series - Installation handbook
CAMERA SETTINGS
Enables you to adjust contrast, brightness and hue for the picture coming
from any outdoor station:
1. Enter the administrator password and then tap the button.
2. The device shows the list of the video outdoor stations connected: tap one
of them and then tap the button.
3. The device shows the picture coming from the selected camera: tap
brightness, contrast or hue buttons to adjust the image, the corre-
sponding slider will appear.
To close an adjustment slider and return to Camera settings
page, tap
button in the top left corner of the screen.
The brightness adjustment iss also available during a conversation
or camera recall using wheel
E
.
4. Tap the green button to confirm: the device saves the settings
or
Tap the button to return to the Settings menu without saving the changes.
Fig. 13
Fig. 14
CAMERA SETTINGS
BRIGHTNESS
DURING A VIDEO CALL
During a call from an outdoor station (or during a camera recall) you’re able to
make the following operations and adjustments:
Activate a secondary service
Activate a secondary camera input (through tactile push button)
Enable or disable microphone
Take a snapshot
Reject or close the call
ACTIVATE A SECONDARY SERVICE
1. Tap icon: a menu will appear with secondary services available.
2. Tap the desired service: it will be highlighted in blue.
3. Tap the green button in the top right corner of the screen to confirm
or
Tap the button to return to the previous screen without activating any
secondary service.
ACTIVATE A SECONDARY CAMERA INPUT
1. Press and keep pressed the tactile push button until the display shows
the camera switching notice: the display now shows the video coming from
the alternative video source.
2. To switch the video source back again, repeat the steps above .
3. Press and keep pressed tactile push button to take a snapshot: the picture
will overwrite the snapshot already taken. To see the snapshot go to
Event
log
and tap the related event. For details see
.
4. If there are no external video sources connected to the door panel, an alert
message will be shown.
Fig. 15
MAIN ENTRANCE
Art. 6296
3.5" touch screen videophone for IPure system
Summary of Contents for IP videokit IPVK/6296 Series
Page 72: ...66550062 EN V6 0 31 10 21 72...
Page 73: ...66550062 EN V6 0 31 10 21 73...
Page 74: ...66550062 EN V6 0 31 10 21 74...
