Configuration
40
HQ−IDC−23012P
Order No. M578527AC/112003
© 2003 videotronic gmbh
ALL RIGHTS RESERVED
3.2.17
IR (Day and Night Function)
In this menu you can activate the automatic day and night function. During the
day the camera switches to the colour mode for optimum colour reproduction,
and during the night for clear detection to the black and white mode. The IR
filters are removed.
Move the arrow
with the
<Down>
key
to the
<IR>
menu.
Press the
<ENTER>
key to open the input
mode.
Press the
<UP>
or
<DOWN>
keys to
enable
<ON>
the function.
Press the
<ENTER>
key twice to open the
input mode.
Press the
<UP>
or
<DOWN>
keys to
switch to
INT
or
EXT
.
INT
If this option is selected, an internal signal
is registered (AGC or Sense up). The
camera switches automatically from the
colour to the black and white mode.
Note:
If you have selected short exposure times in the
AEG
menu, the
switch−over from black and white to
colour mode will
not
take place
automatically. If a lower gain setting has been chosen in the
AGS
menu, the
switch to black and white mode will be delayed.
EXT
If this option is selected, an external signal is registered. When this function is
selected, the camera switches over according to your settings.
Press the
<ENTER>
key to open the input mode of the
INT
or
EXT
function.
Fig. 49
IR
SETUP MENU [3/4]
POSITION
SAVE
H−GAIN
+6
V−GAIN
+6
IR
ON.
MOTION
ON.
INITIAL
ON
Fig. 50
IR
SETUP MENU [3/4]
POSITION
SAVE
H−GAIN
+6
V−GAIN
+6
IR
INT.
MOTION
ON.
INITIAL
ON
Summary of Contents for HQ-IDC-23012P
Page 6: ...Contents 6 HQ IDC 23012P Order No M578527AC 112003 2003 videotronic gmbh ALL RIGHTS RESERVED...
Page 106: ...Annex 106 HQ IDC 23012P Order No M578527AC 112003 2003 videotronic gmbh ALL RIGHTS RESERVED...
Page 107: ...Annex 107 HQ IDC 23012P Order No M578527AC 112003 2003 videotronic gmbh ALL RIGHTS RESERVED...
