Videotec WASPT, Instruction Manual

Page: 18 / 134

EN - English - I
nstruc
tion manual
16 MNVCWASPT_2045_EN
7.1 Washer installation (ULISSE
COMPACT range)
Installation examples (7.5 Examples of
washer installation, page 20).
Position the nozzle support bracket (01) in the
appropriate groove (02) on the base and lock it using
the 2 screws (03). Dismantle the nozzle (04) from the
semi-rigid pipe on the washer supplied. Position the
nozzle and lock it using washer and nut (05). Install
the gasket (06) on the bottom hole on the bracket.
Pass the delivery pipe (07) through the gasket and
connect it to the nozzle.
02
04
07
06
01
05
03
Fig. 24
Secure the delivery pipe using the provided cable tie.
Fig. 25 Final washing position.
To start the wash system refer to the PTZ camera
manual.
7.2 Washer installation (ULISSE
EVO range)
Installation examples (7.5 Examples of
washer installation, page 20).
7.2.1 Washer installation on the PTZ
camera
Remove the nozzle (01) from the semi-rigid pipe
on the washer supplied. Position the nozzle in the
bracket and fasten it with the washer and the nut
(02). Assemble the gasket (03) on the lower part of
the bracket. Pass the delivery pipe (04) through the
gasket and connect it to the nozzle.
01
04
03
02
Fig. 26
Fasten the delivery pipe to the nozzle using the clip
supplied.
Fig. 27