Instruc
tion manual - English - EN
15
MNVCMBA_1817_EN
8 Instructions for safe
operation
8.1 Safe operation
Before proceeding with the following
operations, make sure that the mains
voltage is correct.
Consult the use instructions of the
explosion-proof box.
8.1.1 Commissioning
Fully and carefully read the user manual and the
use instructions of the explosion-proof box before
proceeding with operation.
Test system operation for positive results before
closing the product and allowing the presence of a
dangerous atmosphere.
8.1.2 Safety rules
Before powering the system, install an overload
protection device in the electrical equipment for the
building.
Make sure that all precautions for personal safety
have been taken.
Installation of the electrical equipment must comply
with the local legislation in force.
9 Switching on
The unit is switched on by connecting the power
supply.
To switch off the unit disconnect the power.
10 Maintenance
The manufacturer declines all liability for
damage to any of the apparatus mentioned
in this handbook, when resulting from
tampering, use of non-original spare parts,
installation, maintenance and repairs
performed by non-authorised, non-skilled
personnel.
Whenever replacing the parts as indicated,
always use VIDEOTEC original spare parts
and meticulously follow the maintenance
instructions supplied with every spare parts
kit.
For all maintenance interventions, we
recommend you return the product to the
laboratory that will perform all required
operations.
