08/27/14 INS-24C1.3XW
Rev A
- DET. SETTING: DETECTION SETTING
• SENSITIVITY [0 ~ 20]:
Motion sensitivity. Smaller
value more sensitive.
• OBJ. KEEP LV [0 ~
60]: It has trade-off value
maintain motion detection
but has less preciseness of
detection.
• MOTION EST. [0 ~ 21]:
MOTION ESTIMATION. If the motion of object disappears,
predict where object appear again.
• SIGNAL OUT [ON / OFF]: When detected motion, output
GPIO signal.
- WINDOW TONE [0~6]: Set up the tone of mask area. Motion
detection area is excluded mask area.
- WINDOW ZONE [0 ~ 3]: Set up the window zone.
- WINDOW USE [OFF / ON]: Set up window use.
- DET H-POS [0~60]: Set up the horizontal start point of detecting
area.
- DET V-PIOS[ 0~40]: Set up the vertical start point of detecting
area.
- DET H-SIZE [0~41]: Set up the horizontal size of detecting area.
- DET V-SIZE [0~33]: Set up the vertical size of detecting area.
ALARM
• SHAKING [OFF / ON]: If
camera is shaking,
output ‘Camera Shaking!!!’
Alarm.
• SHAKE SCALE [0 ~ 20]:
Shaking detection sensi-
tivity. Smaller value more
sensitive.
• BRIGHT CHG. [OFF / ON]: If brightness is changed around
camera, output ‘Brightness predict where object appear
again.
• BRIGHT SCL. [0 ~20]: Brightness change detection sensi-
tivity. Smaller value more sensitive.
QUICK ZOOM: If an object is detected, register in Zoom schedule.
• MOVING [0 ~ 240]:
Execute Zoom-In / Out as
much as set frame value.
• ZOOM IN [0 ~ 240]:
Maintain Zoom state as
much as set frame value.
• STANDBY [0 ~ 240]:
Maintain the state which
is no execution of Zoom In / Out as much as set frame value.
• SYNCHRONOUS [OFF / ON]: Execute Zoom according to
the period.
• TRACKING [OFF / ON]: Continued tracking motion area
and execute Zoom-In / Out.
• REPEAT [OFF / ON]: The area which is already executed
Zoom also repeat.
PRIVACY [ON / OFF]: Masks areas that you want to hide on the
screen.
The camera can activate up to 16 privacy masks. Switch between
ON and OFF to activate or deactivate this function.
- ZONE NUM [0 ~ 15]: Select a
mask out of the 16mask areas
and set the options below for the
selected mask.
- ZONE DISP [ON / OFF]: Choose
ON to activate privacy masks and
press OFF to deactivate masks.
- H-POS [0 ~ 60]: Defi ne the horizontal start position of the
privacy mask.
- V-POS [0 ~ 40]: Defi ne the vertical start position of the
privacy mask.
- H-SIZE [0 ~ 40]: Defi ne the horizontal size of the privacy
mask.
- V-SIZE [0 ~ 40]: Defi ne the vertical size of the privacy
mask.
- Y LEVEL [0 ~ 20]: Defi ne the brightness of the mask color.
- CR LEVEL [0 ~ 20]: Defi ne the red amount of the mask
color.
- CB LEVEL [0 ~ 20]: Defi ne the blue amount of the mask
color.
COMM ADJ.: This function sets up the camera communication sta-
tus when controlling the camera through an external control device.
- CAM ID: Determines the cam-
era’s identifi cation number
(between 0 and 255).
- BAUD RATE: Select 2400 / 4800
/ 9600 / 57600 / 115200 bps.
RETURN: Select this to save the SPECIAL menu settings and return
to the MAIN SETUP menu.
4.12 System
VIEW ANGLE [ WIDE 4:3 / WIDE 16:9 / NORMAL ]: Choose a view
angle.
CVBS [PAL / NTSC]: Select the video format that matches the
present TV system.
LANGUAGE: You can select the menu language according to your
requirements
RESET: All settings will be restored to factory default. Please press
the SET button until ‘PUSHING’ displays.
RETURN: Return to the MAIN SETUP menu.
4.13 Exit
Press the Set button in the exit
menu to save the current settings
and exit the Set Up menu.
5. Troubleshooting
If there are problems with the camera operation, check the tables
below.
If the problem persists, please contact the agent who supplied the
product.
Problems
Troubleshooting
Nothing appears
on the screen.
• Check the power connection.
• Check the video signal line connection.
The video image
is not clear.
• Make sure that the lens is clean.
• Clean the lens with a clean lint free
cloth or brush.
• Adjust the contrast control on the
monitor.
• Make sure that the screen is not ex-
posed directly to a bright light. Re-posi-
tion the camera if necessary.
• Re-adjust the back focus of the camera.
The screen is
dark.
• Adjust the contrast control of the mon-
itor.
• If there is an intermediate device, check
the connections.
• Check if an auto iris lens is being used
and if necessary adjust the brightness
level.
There is a
problem with
the camera
operation.
The camera
surface is too
hot and black
stripes appear
on the screen.
• Please check if an appropriate power
source to the camera complies with the
manufacturer’s standard requirement,
or if the voltage is fl uctuating.
• Check for ground loops.
Colors are not
quite right.
• Check the ‘WHITE BAL’ setting.
The screen is
fl ickering.
• Check if the camera is facing directly
into sunlight or fl uorescent light. Try
adjusting the HLC or WDR controls.
• Check if an auto iris lens is being used.
• Check the connection of the lens con-
nector cable.
