manualshive.com logo in svg

VideoLogic CaptivatorPro, User Manual, Page: 48 / 64

Share
Download
VideoLogic CaptivatorPro User Manual Download Page 48

48

Captivator Pro & Captivator ProTV User Guide

[DMSDDLL]
Driver=c:\vlpower\vlvidctl.dll

where c:\vlpower is the directory where the Captivator Pro/TV
software was installed. If it is not present, use the text editor to
add the section and line to the file, save the file, and then restart
Windows.

“Error: 0x0117, VDI_ERR_CANT_LOAD_PPSCALE”

i. You have not installed a VM-Channel graphics card, such as

928Movie or PCI Movie, in your PC. You must have a
graphics card that supports the VM-Channel installed in your
PC and working before you install Captivator Pro/TV.

ii. The component PPSCALE.DRV cannot be found. Make sure

that you are using v1.1 or above of the PCI Movie software,
or v1.1.1 or above of the 928Movie software.

iii. The PPSCALE.DRV component is an old version or has been

corrupted. Run Setup again and reinstall the
Captivator Pro/TV software.

“Error: 0x0119, VDI_ERR_CANT_LOAD_INTERCEPTOR”

i. You have not installed a VM-Channel graphics card, such as

928Movie or PCI Movie, in your PC. You must have a
graphics card that supports the VM-Channel installed in your
PC and working before you install Captivator Pro/TV.

ii. The component PPSCALE.DRV cannot be found. Make sure

that you are using v1.1 or above of the PCI Movie software,
or v1.1.1 or above of the 928Movie software.

iii. The PPINTER.DLL component is an old version or

corrupted. Run Setup again and reinstall the
Captivator Pro/TV software. You do not need to remove
Captivator Pro/TV from your PC.

“Error: 0x042a, VLPPAPI Error: MW_BASE_ADDRESS_CONFLICT”

This error may occur if your system is configured for more than
one VM-Channel option card, and two of the cards are
configured for the same base address. See the ReadMe file on the
installation disk for further information.

Summary of Contents for CaptivatorPro

































































Reviews:

No comments