Videocon DIGI NEMO, Owner'S Manual

Page: 5 / 12

８ ７
NAMES AND FUNCTIONS OF CONTROL PANEL
６． ５Ｋｇ
SW65BSP
TEMPERAT.
This button can be used for starting the
washer operation.
This button can also be used to temporarily
stop the washer operation.
To restart the washer operation, press the
START/PAUSE button again.
NOTES:
This is not a cancel button. If you want to
delete the End Buzzer, press the
START/PAUSE button and hold down for
about 4 seconds until beeping stops.
See page 13.
START/PAUSE Button
To turn the power on, press the POWER ON/OFF.
When you want to turn off the power, press the
POWER ON/OFF button again.
When washing has finished, the power will be turned
off in 5 seconds automatically.
NOTES:
? If you want to change the wash program, press the
POWER ON/OFF button and then on it again.
? If you leave the washer turning on without starting
the operation, the power will be turned off in 10
minutes by itself.
POWER ON/OFF Button
You can choose the appropriate
water level that matches the load
size.
You can set CHILD LOCK function.
Refer to CHILD LOCK FUNCTION
at page13.
Different water levels for washing
rinsing optional.
Detailed operation please refer
to Page 13.
?
?
?
WATER LEVEL Button
CHILD LOCK Function
?
time during washing. This indicator shows remained
(E.g.) Remaining time is 20 minutes
REMAINING
TIME
?
This indicator shows when the
washing is finished during
presetting.
? When setting SELECT, the digital
display indicates time or times.
(e.g.) Twice Water Save Rinse
(E.g.) Finish washing 2 hours later
?
When abnormal conditions occur,
the indicator will indicate warning.
(E.g.) Water does not flow
TIMER And PRESET Indicators
PROCESS Button
AndSET Button
To choose the washing course,
press COURSE button.
NOTE :
If you choose the NORMAL,
HEAVY DUTY, CUSTOM
course, the washer
will
automatically begin the
NEURO & FUZZY operation.
COURSE Button
These are the spoon
indications of the
DETERGENT volume.
page9.
Detailed operation
please refer to
DETERGENT Indicators
RINSE
PRESET
Detailed operation please refer to Page 10.
Detailed operation please refer to Page 13.
? The SET button can be used to set PRESET,
SOAK, WASH time, RINSE time and SPIN time.
? Press “SET” button to adjust water power during
washing or rinsing.
? Water power fun tion could not be set for
DELICATE or BLANKET course.
c
The PROCESS Button can
be used to set a variety of
wash programs.
?
９