(4)
(4)
Caster
with brake
Caster
without brake
Assembly Instructions
5104DE
Desk End for PD51 Series
This document shows assembly and installation of the 5104DE Desk End.
This Desk End fits PD51 Series main components only.
Parts are reversible for left or right-hand applications.
Note: If you cannot understand these instructions or are concerned about safety of the
installation contact a qualified contractor or contact AVFI at 1-877-834-3876
190
Don Hillock Drive |
Aurora |
Ontario
|
L
4G 0G9 | 1.877.834.3876
Supplied Hardware
5104DE
assembled for
Left-hand application
1/4”x3/4” Bolt (18)
5/8” Screw (36)
Caster with brake
Cover cap (2)
Caster without brake
Corner brace (9)
Supplied Parts
Top
Skirt
Page 1 of 3
www.video-furn.com
Tools required
7/6” (11mm) Wrench or Socket
Phillips screwdriver
5/16” (8mm) drill bit
Power Drill
1
End
Support
5104DE
assembled for
Right-hand application
End Support assembly
for Left-hand application:
(4)
(4)
Caster
with brake
Caster
without brake
End Support assembly
for Right-hand application:
(2)
(2)
Once it’s determined on which side of the main component the 5104DE will be installed on, install hardware to the End Support panel
as shown below for Left-hand or Right-hand application.
Do Not overtighten the bolts, all parts will be reinforced with screws at the end of assembly.
Push casters into stem
until you hear a
‘click’.
